Categories
- Pipe & Tube (18)
- Flange & Fitting (97)
- Fastener & Gasket (12)
- Valve & Pump (18)
- Base Material (10)
- Equipment (6)
- Application (25)
- Technical (107)
The drawing for flat facing (FF) spade flange (also called “paddle blank” or “spade blank”) made in accordance with ASME B16.48. The handle may be integral or welded to the spade blank. It should be capable of supporting the weight of the spade flange in all orientations without permanent deformation to the handle.
Drawing for the raised facing (RF) spade flange (also called “paddle blank” or “spade blank”), ASME B16.48. L: length of handle, to be determined by the user; W: handle width; O: outside diameter of blank; T: thickness of blank. The raised facing dimensions shall be in compliance with ASME B16.5.
NPS | O | T | W | Weight |
---|---|---|---|---|
1/2 | 45 | 3.0 | 38 | 0.07 |
3/4 | 54 | 3.0 | 38 | 0.10 |
1 | 64 | 3.0 | 38 | 0.13 |
1-1/4 | 73 | 6.4 | 38 | 0.30 |
1-1/2 | 83 | 6.4 | 38 | 0.39 |
2 | 102 | 6.4 | 51 | 0.60 |
2-1/2 | 107 | 6.4 | 51 | 0.71 |
3 | 133 | 6.4 | 64 | 1.04 |
3-1/2 | 159 | 9.7 | 64 | 1.93 |
4 | 172 | 9.7 | 64 | 2.30 |
5 | 194 | 9.7 | 76 | 2.99 |
6 | 219 | 12.7 | 76 | 4.75 |
8 | 276 | 12.7 | 76 | 7.49 |
10 | 337 | 15.7 | 102 | 13.21 |
12 | 406 | 19.1 | 102 | 22.47 |
14 | 448 | 19.1 | 108 | 27.22 |
16 | 511 | 22.4 | 108 | 40.71 |
18 | 546 | 25.4 | 114 | 52.71 |
20 | 603 | 28.4 | 121 | 70.86 |
24 | 714 | 31.8 | 140 | 110.08 |
NPS | O | T | W | Weight |
---|---|---|---|---|
1/2 | 51 | 6.4 | 38 | 0.14 |
3/4 | 64 | 6.4 | 38 | 0.21 |
1 | 70 | 6.4 | 38 | 0.26 |
1-1/4 | 79 | 6.4 | 38 | 0.34 |
1-1/2 | 92 | 6.4 | 38 | 0.46 |
2 | 108 | 9.7 | 51 | 0.89 |
2-1/2 | 127 | 9.7 | 51 | 1.22 |
3 | 146 | 9.7 | 64 | 1.65 |
3-1/2 | 162 | 12.7 | 64 | 2.51 |
4 | 178 | 12.7 | 64 | 3.04 |
5 | 213 | 15.7 | 76 | 5.18 |
6 | 248 | 15.7 | 76 | 6.98 |
8 | 305 | 22.4 | 76 | 14.45 |
10 | 359 | 25.4 | 102 | 22.52 |
12 | 419 | 28.4 | 102 | 33.96 |
14 | 483 | 31.8 | 108 | 49.54 |
16 | 536 | 38.1 | 108 | 72.38 |
18 | 594 | 41.1 | 114 | 95.70 |
20 | 651 | 44.5 | 121 | 123.74 |
24 | 772 | 50.8 | 140 | 197.18 |
NPS | O | T | W | Weight |
---|---|---|---|---|
1/2 | 51 | 6.4 | 38 | 0.21 |
3/4 | 64 | 6.4 | 38 | 0.32 |
1 | 70 | 6.4 | 57 | 0.42 |
1-1/4 | 79 | 9.7 | 57 | 0.74 |
1-1/2 | 92 | 9.7 | 67 | 0.98 |
2 | 108 | 9.7 | 57 | 1.39 |
2-1/2 | 127 | 12.7 | 67 | 2.20 |
3 | 146 | 12.7 | 67 | 3.01 |
3-1/2 | 159 | 15.7 | 76 | 4.10 |
4 | 191 | 15.7 | 76 | 5.57 |
5 | 238 | 19.1 | 86 | 9.54 |
6 | 264 | 22.4 | 86 | 13.46 |
8 | 318 | 28.4 | 95 | 23.74 |
10 | 397 | 35.1 | 105 | 42.78 |
12 | 454 | 41.1 | 105 | 64.20 |
14 | 489 | 44.5 | 114 | 79.64 |
16 | 562 | 50.8 | 124 | 117.28 |
18 | 610 | 53.8 | 133 | 146.95 |
20 | 679 | 63.5 | 133 | 208.74 |
24 | 787 | 73.2 | 152 | 319.35 |
NPS | O | T | W | Weight |
---|---|---|---|---|
1/2 | 60 | 6.4 | 38 | 0.25 |
3/4 | 67 | 6.4 | 41 | 0.34 |
1 | 76 | 6.4 | 57 | 0.46 |
1-1/4 | 86 | 9.7 | 57 | 0.80 |
1-1/2 | 95 | 9.7 | 67 | 1.03 |
2 | 140 | 12.7 | 57 | 2.26 |
2-1/2 | 162 | 12.7 | 67 | 3.00 |
3 | 165 | 15.7 | 67 | 3.99 |
4 | 203 | 19.1 | 76 | 6.95 |
5 | 244 | 22.4 | 86 | 11.17 |
6 | 286 | 25.4 | 86 | 16.74 |
8 | 356 | 35.1 | 95 | 33.59 |
10 | 432 | 41.1 | 105 | 56.10 |
12 | 495 | 47.8 | 105 | 84.33 |
14 | 518 | 53.8 | 114 | 103.30 |
16 | 572 | 60.5 | 124 | 140.52 |
18 | 635 | 66.5 | 133 | 189.20 |
20 | 696 | 73.2 | 133 | 247.22 |
24 | 835 | 88.9 | 152 | 422.62 |
NPS | O | T | W | Weight |
---|---|---|---|---|
1/2 | 61 | 6.4 | 38 | 0.25 |
3/4 | 67 | 9.7 | 41 | 0.44 |
1 | 76 | 9.7 | 64 | 0.60 |
1-1/4 | 86 | 9.7 | 64 | 0.81 |
1-1/2 | 95 | 12.7 | 70 | 1.22 |
2 | 140 | 12.7 | 70 | 2.28 |
2-1/2 | 162 | 15.7 | 76 | 3.51 |
3 | 172 | 19.1 | 76 | 4.92 |
4 | 206 | 22.4 | 89 | 8.04 |
5 | 251 | 28.4 | 89 | 14.04 |
6 | 279 | 35.1 | 89 | 20.95 |
8 | 349 | 41.1 | 102 | 37.23 |
10 | 432 | 50.8 | 114 | 67.57 |
12 | 518 | 60.5 | 114 | 112.60 |
14 | 575 | 66.5 | 127 | 150.53 |
16 | 638 | 76.2 | 133 | 210.67 |
18 | 702 | 85.9 | 146 | 286.13 |
20 | 752 | 95.3 | 152 | 362.40 |
24 | 899 | 111.3 | 178 | 597.59 |
NPS | O | T | W | Weight |
---|---|---|---|---|
1/2 | 67 | 9.7 | 38 | 0.39 |
3/4 | 73 | 9.7 | 41 | 0.49 |
1 | 83 | 9.7 | 64 | 0.67 |
1-1/4 | 102 | 12.7 | 64 | 1.21 |
1-1/2 | 114 | 15.7 | 70 | 1.79 |
2 | 143 | 15.7 | 70 | 2.74 |
2-1/2 | 165 | 19.1 | 76 | 4.21 |
3 | 194 | 22.4 | 76 | 6.67 |
4 | 232 | 28.4 | 89 | 11.72 |
5 | 276 | 35.1 | 89 | 19.65 |
6 | 314 | 41.1 | 89 | 29.21 |
8 | 384 | 53.8 | 102 | 55.58 |
10 | 473 | 66.5 | 114 | 101.37 |
12 | 546 | 79.2 | 114 | 158.65 |
ASME B16.48 Line Blanks | |||
---|---|---|---|
Figure-8 | FF/RF | F/RTJ | M/RTJ |
Spade | FF/RF | F/RTJ | M/RTJ |
Spacer | FF/RF | F/RTJ | M/RTJ |