ASME B16.11 Plug

December 14, 2021

Technical Drawing

The technical drawing of 3 types of ASME B16.11 plug: (I) square head plug; (II) hex head plug; (III) round head plug. A: minimum length; B: minimum height of square head; C: minimum width flats; D: minimum overall length of round head plug; E: nominal round head diameter; H: minimum height of hex head; F: nominal width flats of hex head.

The ASME B16.11 plug, like a cap, is designed to close off the end of a run of pipe. It is manufactured for screwed fittings with male threads and are screwed into the end of a pipe to create a seal. As illustrated in the drawing above, plugs can be further classified according to the head style: square head plug; hex head plug; round head plug. ASME B16.11 threaded plugs are available in sizes 1/8″ through 4″ and are not identified by class designation. They may be used for pressure ratings up to Class 6000.

ASME B16.11 Forged Fittings (SW & THD)
90° Elbow	45° Elbow	Cross
Tee	Coupling	Half Coupling
Boss	Cap	Couplet
Street Elbow*	Plug*	Bushing*

*Click to view dimensions and masses of ASME B16.11 fittings.

Dimensions & Masses

NPS	A mm	B mm	C mm	Mass Kg
1/8"	10	6	7.15	0.01
1/4"	11	6	9.55	0.02
3/8"	13	8	11.11	0.03
1/2"	14	10	14.29	0.05
3/4"	16	11	15.88	0.09
1"	19	13	20.64	0.15
1-1/4"	21	14	23.81	0.27
1-1/2"	21	16	28.58	0.40
2"	22	18	33.27	0.68
2-1/2"	27	19	38.10	1.02
3"	28	21	42.86	1.47
4"	32	25	63.50	3.70

*Dimensions A, B, C and masses for ASME B16.11 square head plugs.

NPS	A mm	H mm	F mm	Mass kg
1/8"	10	6	11.11	0.02
1/4"	11	6	15.88	0.03
3/8"	13	8	17.46	0.05
1/2"	14	8	22.23	0.08
3/4"	16	10	26.99	0.14
1"	19	10	34.93	0.25
1-1/4"	21	14	44.45	0.51
1-1/2"	21	16	50.80	0.64
2"	22	18	63.50	1.06
2-1/2"	27	19	76.20	1.78
3"	28	21	88.90	2.75
4"	32	25	117.48	6.20

*Dimensions A, H, F and masses for ASME B16.11 hex head plugs.

NPS	A mm	D mm	E mm	Mass kg
1/8"	10	35	10	0.03
1/4"	11	41	14	0.05
3/8"	13	41	18	0.08
1/2"	14	44	21	0.12
3/4"	16	44	27	0.19
1"	19	51	33	0.34
1-1/4"	21	51	43	0.54
1-1/2"	21	51	48	0.74
2"	22	64	60	1.45
2-1/2"	27	70	73	2.22
3"	28	70	89	3.43
4"	32	76	114	6.30

*Dimensions A, D, E and masses for ASME B16.11 round head plugs.

Maybe you like also

» Pneumatic Actuated Knife Gate Valves

» Knife Gate Valves for Copper Slurry Pipeline Systems

» ASTM A335 P1, P11, P22 | 0.5Mo, 1.25Cr-0.5Mo, 2.25Cr-1Mo

» Stud Bolts Dimensions for ASME B16.47 Series B Class 900 RF flanges

» Stud Bolts Dimensions for ASME B16.47 Series B Class 600 RF flanges

» Stud Bolts Dimensions for ASME B16.47 Series B Class 400 RF flanges

ASTM A890 5A | CE3MN & J93404 | Duplex 2507

MW-Series Knife Gate Valves for Secondary Sedimentation Tanks

Supply of A105 flanges to Wholesalers in Al Kharj Road, Riyadh

Knife Gate Valves for Ash Handling Systems in Power Plants

Pneumatic Actuated Knife Gate Valves

We have been dedicating ourselves to piping and pipeline engineering since the inception. The company provides integrated solution to package supply of various piping & pipeline materials, components, and equipment.

Products
About Us
Contact Us
Sitemap
Application
Technical

Room 502, No.448 Heping West Road, Shijiazhuang, Hebei Province, China
Tel: +86-311-67906676
Fax: +86-311-67906676
Email: sales@pipingpipeline.com
Whatsapp: 0086-15076331069